How to Measure a Trampoline | Trampolinesshop

# Measuring Guide

## Trampoline Measurements

There is often confusion over what constitutes a trampoline's size. It is important to know the correct, industry recognised size so you can buy the corresponding size of trampoline accessories, i.e the ones that will fit!

People also frequently ask us how to attach the surround pad to the trampoline frame. We have also provided an explaination of how to do this.

### How to Measure a Round Trampoline:

To find the size of a round trampoline you need to know the diameter from end to end of the metal frame and not of the mat.

1. Pick one side of the trampoline at the frame and measure it to the other side

2. Repeat this from the opposite side as illustrated below

3. Work out the average size of the two and this will give an accurate reading of the trampolines size. The reason you need to work out the average of these two measurements is to allow for any bends in the frame or if your trampoline isn't level.

### How to Measure a Rectangular Trampoline:

In order to measure a rectangular trampoline you need to find out the length of each side of the metal frame of the trampoline.

1. Start with the two shorter sides as illustrated below - these should be identical

2. Then move on to the two longer sides, again they will be identical (or the trampoline is not a rectangle!)

3. These two measurements will give you the size of your rectangular trampoline

Please Note: Our rectangular trampolines (and accessories) are measured in feet - to convert to feet from metres, multiply the metres by 3.2808. For example:
3 metres x 3.2808 = 9.84 feet, so 10 feet would equal 3 m 4.8 cm.

### How to Measure an Oval Trampoline:

To properly measure an oval trampoline, similarly to rectangular trampolines you must find the measurements of the long and short sides of the oval.

1. Measure the shorter side at its greatest width

2. Now measure the longer side at its greatest width

3. The shorter side by the long side both at their greatest widths will give you the measurement of your oval trampoline

### How To Attach Your Trampoline Pads:

1. Lay the pad over the trampoline so that the springs and the steel frame is covered completely.

2. Thread the strap through the loop on the bottom part of the pad.

3. Tie the strap to the frame.

Now you know what size trampoline you have, if you need a new set of trampoline pads we have a great selection of replacement trampoline pads and other accessories. To view them just click on links below:

If you have a trampoline problem or need some trampoline advice why not take a look at our Trampoline Frequently Asked Questions page.

We have tried to cover the most common problems such as how to get your trampoline ready for the summer or what to do if your garden has a slope.

We are always expanding this guide adding lots more trampoline solutions..

Cookies at Big Game Hunters

We use cookies to ensure that we give you the best experience on our website, if you are happy with this please continue.

Continue »